Vacuuming: A Key to Indoor Air Quality

Clean air in schools, offices, and health care facilities is crucial, and often starts at the surface. According to the U.S. Environmental Protection Agency (EPA), Americans spend about 90 percent of their time indoors, where they can be exposed to tiny pollutants. In fact, a 2018 study published by Science, a publication of the American Association for the Advancement of Science, has shown that indoor air can be up to seven times more polluted than the air outside.

These pollutants – including asthma and allergy triggers – often rise from floors and carpets into the air and are easily inhaled. For example, a Minnesota Department of Health study concluded floors at local schools contained the highest concentrations of allergens in the building--and that carpets are even more susceptible than smooth floors— which is especially concerning as serious health issues are associated with indoor air pollutants. Along with aggravating asthma and allergy symptoms, the EPA says, poor indoor air quality has been shown to cause other physical problems such as fatigue, shortness of breath, and headaches

According to the Asthma and Allergy Foundation of America (AAFA) more than 60 million Americans are suffering from asthma and allergies. Allergy Standards Limited (ASL) recommends that facility managers implement a number of interventions – including a focus on vacuuming – to help contain and reduce exposure to asthma and allergy triggers.

Following these vacuuming and floor cleaning best practices can help achieve exceptional air quality in commercial facilities, which can improve quality of life, attendance, and performance of building occupants:

Step 1: Build a Cleaning Foundation

It’s important to develop a floor plan that shows the areas receiving the heaviest daily foot traffic, so they can be prioritized for cleaning. Carpets should be deep cleaned at least twice per year, using carpet dryers or fans after the job is complete to prevent any remaining moisture from producing mold. In addition, carpets should be replaced as specified by the manufacturer’s recommendations and cleaning equipment properly maintained to ensure the best results.

Step 2: Use Correct Vacuuming Techniques

Vacuum both carpeted and hard surface floors frequently, with slow and repeated passes. Heavy traffic areas should receive a minimum of two vacuum passes per day. Clean floors faster by removing dry dirt with a vacuum instead of a dry mop before wet-mopping; brooms and mops push dirt and allergens across the floor and into the air, while vacuuming removes them. Don’t forget to pay special attention to walk-off mats, which should be vacuumed at least once a day and professionally cleaned every few days.

Step 3: Choose the Right Tools and Features

Utilize hard-surface tools to clean hard-to-reach spots and cover a wider range of allergen-producing areas. Use high-quality HEPA-filter vacuums to thoroughly clean and reduce allergens on multiple surfaces, including tile. As explained by AAFA, some vacuums add particles and allergens back into the air, so make sure to use a vacuum that traps allergens as it removes them. Look for products with certifications to provide peace of mind.

Asthma and allergies in buildings are serious issues, affecting millions who spend large amounts of time indoors, and it’s important to recognize that asthma and allergy triggers often come from floors and carpets. By taking strategic initial steps, using proper techniques, and utilizing the correct products, facility managers can breathe easy knowing they are providing clean air quality through vacuuming and floor cleaning.

Brad Hoare

Senior Product Manager, Sanitaire

This article first appeared on CMMOnline.com

Your Shopping Cart

Showing 1 of 0 item(s) View All
  •  
    Price Each
    QTY
    Subtotal
  • Price Each
    QTY
    Subtotal

Estimated SUBTOTAL:

Proceed To Cart Continue Shopping
  • - -
  • Do you want to sign up for our email newsletter?